Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

Use this command to display the sFlow source interface configured on the switch.

(NETGEAR Switch) #show sflow source-interface

sFlow Client Source Interface.................. (not configured)

A Switch Database Management (SDM) template is a description of the maximum resources 

a switch or router can use for various features. Different SDM templates allow different 
combinations of scaling factors, enabling different allocations of resources depending on how 
the device is used. In other words, SDM templates enable you to reallocate system 
resources to support a different mix of features based on your network requirements. 

If you insert a unit in a stack and its template does not match the 
template of the stack, the unit reboots automatically using the 
template that is used by other stack members. To avoid the automatic 
reboot, first set the template to the template that is used by existing 
members of the stack. Then power off the new unit, insert it in the 
stack, and power on the unit.

Packet Sampling Rate

The statistical sampling rate for packet sampling from this source.

Max Header Size

The maximum number of bytes that should be copied from a sampled packet to form a 
flow sample.

Format

show sflow source-interface 

Mode

Privileged EXEC

sFlow Client Source Interface The interface ID of the physical or logical interface configured as the sFlow client source 

interface.

sFlow Client Source IPv4 

Address

The IP address of the interface configured as the sFlow client source interface.