Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

Remote Monitoring (RMON) is a method of collecting a variety of data about network traffic. 
RMON supports 64-bit counters (RFC 3273) and High Capacity Alarm Table (RFC 3434). 

There is no configuration command for ether stats and high capacity 
ether stats. The data source for ether stats and high capacity ether 
stats are configured during initialization.rmon alarm

This command sets the RMON alarm entry in the RMON alarm MIB group.

Format

rmon alarm alarm-number variable sample-interval {absolute | delta} 

rising-threshold value [rising-event-index] falling-threshold value 

[falling-event-index] [startup {rising | falling | rising-falling}] [owner 

string]

Mode

Global Config

Alarm Index

An index that uniquely identifies an entry in the alarm table. Each entry defines a diagnostic sample 

at a particular interval for an object on the device. The range is 1 to 65535.

Alarm Variable

The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 
primitive type of integer.

Alarm Interval

The interval in seconds over which the data is sampled and compared with the rising and falling 
thresholds. The range is 1 to 2147483647. The default is 1.

Alarm Absolute 

Value

The value of the statistic during the last sampling period. This object is a read-only, 32-bit signed 
value.

Alarm Rising 

Threshold

The rising threshold for the sample statistics. The range is 2147483648 to 2147483647. The default 
is 1.

Alarm Rising Event 

Index

The index of the eventEntry that is used when a rising threshold is crossed. The range is 1 to 65535. 
The default is 1.

Alarm Falling 

Threshold

The falling threshold for the sample statistics. The range is 2147483648 to 2147483647. The default 
is 1.

Alarm Falling Event 

Index

The index of the eventEntry that is used when a falling threshold is crossed. The range is 1 to 65535. 
The default is 2.

Alarm Startup 
Alarm

The alarm that may be sent. Possible values are rising, falling or both rising-falling. The default is 
rising-falling.

Alarm Owner

The owner string associated with the alarm entry. The default is monitorAlarm.