Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

This section describes the commands you use to configure VLAN settings.

This command gives you access to the VLAN Config mode, which allows you to configure 
VLAN characteristics.

This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN 
identification number (ID 1 is reserved for the default VLAN). The VLAN number is in the 
range 2–4093.

This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 
is reserved for the default VLAN). The VLAN number is in the range 2–4093.

This command sets the frame acceptance mode on an interface or range of interfaces. For 
VLAN Only mode, untagged frames or priority frames received on this interface are 
discarded. For Admit All mode, untagged frames or priority frames received on this interface 
are accepted and assigned the value of the interface VLAN ID for this port. For 
admituntaggedonly mode, only untagged frames are accepted on this interface; tagged 
frames are discarded. With any option, VLAN tagged frames are forwarded in accordance 
with the IEEE 802.1Q VLAN Specification.

Format

vlan database

Mode

Privileged EXEC

Format

vlan number

Mode

VLAN Config

Format

no vlan number

Mode

VLAN Config

Default

all

Format

vlan acceptframe {admituntaggedonly | vlanonly | all}

Mode

Interface Config