Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

Switching Commands

438

M4200 and M4300 Series ProSAFE Managed Switches

GVRP Commands

This section describes the commands you use to configure and view GARP VLAN
Registration Protocol (GVRP) information. GVRP-enabled switches exchange VLAN
configuration information, which allows GVRP to provide dynamic VLAN creation on trunk
ports and automatic VLAN pruning.

Note:

If GVRP is disabled, the system does not forward GVRP messages.

set gvrp adminmode

This command enables GVRP on the system.

no set gvrp adminmode

This command disables GVRP.

set gvrp interfacemode

This command enables GVRP on a single port (Interface Config mode), a range of ports
(Interface Range mode), or all ports (Global Config mode).

Term

Definition

GMRP Admin
Mode

The administrative mode of GARP Multicast Registration Protocol (GMRP) for the system.

GVRP Admin Mode The administrative mode of GARP VLAN Registration Protocol (GVRP) for the system.

Default

disabled

Format

set gvrp adminmode

Mode

Privileged EXEC

Format

no set gvrp adminmode

Mode

Privileged EXEC

Default

disabled

Format

set gvrp interfacemode

Mode

Interface Config

Interface Range

Global Config