Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

This command displays the GMRP entries in the Multicast Forwarding Database (MFDB) 
table.

This section describes the commands you use to configure port-based network access 
control (IEEE 802.1X). Port-based network access control allows you to permit access to 
network services only to and devices that are authorized and authenticated.

Use this command to configure the authentication methods for port-based access to the 
switch. The additional methods of authentication are used only if the previous method returns 
an error, not if there is an authentication failure. 

The possible methods are as follows:

. Uses the internal authentication server users database for authentication. 

. Uses the local user name database for authentication.

. Uses no authentication.

. Uses the list of all RADIUS servers for authentication.

You can configure one method at the time. However, you can configure more than one 
method by issuing the command several times.

Format

show mac-address-table gmrp

Mode

Privileged EXEC

VLAN ID

The VLAN in which the MAC Address is learned.

MAC Address

A unicast MAC address for which the switch has forwarding and or filtering information. The format is 

6 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB.

Type

The type of the entry. Static entries are those that are configured by the end user. Dynamic entries 
are added to the table as a result of a learning process or protocol.

Description

The text description of this multicast table entry.

Interfaces

The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

Format

aaa authentication dot1x default {ias | local | none | radius}

Mode

Global Config