Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

The switch supports 802.1X (dot1x) supplicant functionality on point-to-point ports. The 
administrator can configure the user name and password used in authentication and 
capabilities of the supplicant port.

This command sets the port’s dot1x role. The port can serve as either a supplicant or an 
authenticator.

This command sets the ports authorization state (Authorized or Unauthorized) either 
manually or by setting the port to auto-authorize upon startup. By default all the ports are 
authenticators. If the port’s attribute needs to be moved from authenticator to supplicant or 
from supplicant to authenticator, use this command.

This command sets the port-control mode to the default, auto.

Format

dot1x pae

 {supplicant | authenticator}

Mode

Interface Config

Format

dot1x supplicant port-control

 {auto | force-authorized | force-unauthorized}

Mode

Interface Config

auto

The port is in the Unauthorized state until it presents its user name and password credentials to an 
authenticator. If the authenticator authorizes the port, then it is placed in the Authorized state. 

force-authorized

Sets the authorization state of the port to Authorized, bypassing the authentication process.

force-unauthorized

Sets the authorization state of the port to Unauthorized, bypassing the   authentication process.

Default

auto

Format

no dot1x supplicant port-control

 

Mode

Interface Config