Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

Use this command to enter Interface configuration mode for the specified VLAN. The vlan-id 
range is 1 to 4093.

This command displays the VLAN routing information for all VLANs with routing enabled.

Virtual Router Redundancy Protocol (VRRP) commands are 
supported on the M4300 series switches only.

This section describes the commands you use to view and configure Virtual Router 
Redundancy Protocol (VRRP) and to view VRRP status information. VRRP helps provide 
failover and load balancing when you configure two devices as a VRRP pair.

Format

interface vlan vlan-id

Mode

Global Config

Format

show ip vlan

Modes

Privileged EXEC

User EXEC

MAC Address used 
by Routing VLANs

The MAC Address associated with the internal bridge-router interface (IBRI). The same MAC 

Address is used by all VLAN routing interfaces. It will be displayed above the per-VLAN information.

VLAN ID

The identifier of the VLAN.

Logical Interface

The logical unit/slot/port associated with the VLAN routing interface.

IP Address

The IP address associated with this VLAN.

Subnet Mask

The subnet mask that is associated with this VLAN.