Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

This command displays information about each virtual router configured on the switch. This 
command takes no options. It displays information about each virtual router.

This command clears VRRP statistical information from an interface or a VLAN.

 

The virtual 

router ID, vrid, is an integer value that ranges from 1 to 255.

This section describes the commands you use to configure BootP/DHCP Relay on the 
switch. A DHCP relay agent operates at Layer 3 and forwards DHCP requests and replies 
between clients and servers when they are not on the same physical subnet. 

This command enables the circuit ID option mode for BootP/DHCP Relay on the system. 

Format

show ip vrrp interface brief

Modes

Privileged EXEC

User EXEC

Interface

VRID

The router ID of the virtual router.

IP Address

The virtual router IP address.

Mode

Indicates whether the virtual router is enabled or disabled.

State

The state (Master/backup) of the virtual router.

Format

clear ip vrrp interface stats {unit/slot/port vrid} | {vlan vlan-id vrid}

Modes

Interface Config

Default

disabled

Format

bootpdhcprelay cidoptmode

Mode

Global Config