Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

This command displays serial communication settings for the switch.

This section describes the commands you use to configure and view Telnet settings. You can 
use Telnet to manage the device from a remote management host.

Use this command to enable Telnet connections to the system and to enable the Telnet 
Server Admin Mode. This command opens the Telnet listening port. 

Use this command to disable Telnet access to the system and to disable the Telnet Server 

Admin Mode. This command closes the Telnet listening port and disconnects all open Telnet 

sessions. 

Format

show serial

Modes

Privileged EXEC

User EXEC

Serial Port Login Timeout 
(minutes)

The time, in minutes, of inactivity on a serial port connection, after which the switch will close 
the connection. A value of 0 disables the timeout. 

Baud Rate (bps)

The default baud rate at which the serial port will try to connect. 

Character Size (bits)

The number of bits in a character. The number of bits is always 8. 

Flow Control 

Whether Hardware Flow-Control is enabled or disabled. Hardware Flow Control is always 
disabled.

Stop Bits

The number of Stop bits per character. The number of Stop bits is always 1.

Parity 

The parity method used on the Serial Port. The Parity Method is always None.

Default

enabled

Format

ip telnet server enable

Mode

Privileged EXEC

Format

no ip telnet server enable

Mode

Privileged EXEC