Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

This command displays the current inbound Telnet settings. In other words, these settings 
apply to Telnet connections initiated from a remote system to the switch.

This section describes the commands you use to configure Secure Shell (SSH) access to the 
switch. Use SSH to access the switch from a remote management host.

The system allows a maximum of 5 SSH sessions.

Use this command to enable SSH access to the system. (This command is the short form of 
the ip ssh server enable command.)

Format

show telnetcon 

Modes

Privileged EXEC

User EXEC

Remote Connection Login 
Timeout (minutes)

This object indicates the number of minutes a remote connection session is allowed to remain 
inactive before being logged off. May be specified as a number from 1 to 160. The factory 
default is 5. 

Maximum Number of 
Remote Connection 
Sessions

This object indicates the number of simultaneous remote connection sessions allowed. The 
factory default is 5. 

Allow New Telnet 

Sessions

New Telnet sessions will not be allowed when this field is set to no. The factory default value 
is yes.

Telnet Server Admin 
Mode

States whether the Telnet Server Admin Mode is enabled or disabled.

Telnet Server Port

The port number on which the Telnet server can detect requests.

Default

disabled

Format

ip ssh

Mode

Privileged EXEC