Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Routing Commands
757
M4200 and M4300 Series ProSAFE Managed Switches
ICMP Throttling Commands
This section describes the commands you use to configure options for the transmission of
various types of ICMP messages.
various types of ICMP messages.
ip unreachables
Use this command to enable the generation of ICMP Destination Unreachable messages on
an interface or range of interfaces. By default, the generation of ICMP Destination
Unreachable messages is enabled.
an interface or range of interfaces. By default, the generation of ICMP Destination
Unreachable messages is enabled.
no ip unreachables
Use this command to prevent the generation of ICMP Destination Unreachable messages.
ip redirects
Use this command to enable the generation of ICMP Redirect messages by the router. By
default, the generation of ICMP Redirect messages is enabled. You can use this command to
configure an interface, a range of interfaces, or all interfaces.
default, the generation of ICMP Redirect messages is enabled. You can use this command to
configure an interface, a range of interfaces, or all interfaces.
no ip redirects
Use this command to prevent the generation of ICMP Redirect messages by the router.
Default
enable
Format
ip unreachables
Mode
Interface Config
Format
no ip unreachables
Mode
Interface Config
Default
enable
Format
ip redirects
Mode
Global Config
Interface Config
Format
no ip redirects
Mode
Global Config
Interface Config