Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Captive Portal Commands
761
M4200 and M4300 Series ProSAFE Managed Switches
Captive Portal Global Commands
The commands in this section enable you to configure the captive portal settings that affect
the captive portal feature on the switch and all captive portal instances.
the captive portal feature on the switch and all captive portal instances.
captive-portal
Use this command to enter the Captive Portal Configuration Mode.
enable (Captive Portal Config Mode)
This command globally enables the captive portal feature on the switch.
no enable (Captive Portal Config Mode)
The no enable command disables the captive portal functionality.
http port
This command configures an additional HTTP port. Valid port numbers are in the range of
0-65535, excluding port numbers 80 and 443 which are reserved. The HTTP port default is 0
which denotes no additional port and the default port (80) is used.
0-65535, excluding port numbers 80 and 443 which are reserved. The HTTP port default is 0
which denotes no additional port and the default port (80) is used.
Command example:
(NETGEAR Switch) (Config-CP) #http port 8080
(NETGEAR Switch) (Config-CP) #no http port
Format
captive-portal
Mode
Global Config
Default
Disable
Format
enable
Mode
Captive Portal Config
Format
no enable
Mode
Captive Portal Config
Default
0
Format
http port port-number
Mode
Captive Portal Config