Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

This command shows which captive portal SNMP traps are enabled. The show trapflags 
command shows the global captive portal traps configuration. For more information, see the 
sample output of 

The commands in this section are related to captive portal configurations.

Use this command to enter the Captive Portal Instance Mode.

The captive portal configuration, identified by CP ID 1, is the default CP configuration. You 
can create up to nine additional captive portal configurations. The system supports a total of 
ten CP configurations. The Captive Portal ID cp-id

 variable is a number in the range of 

1-10.

This command deletes a captive portal configuration. The command fails if interfaces are 
associated to this configuration. The default captive portal configuration cannot be deleted. 
The Captive Portal ID cp-id

 variable is a number in the range of 1-10.

Format

show captive-portal trapflags

Mode

Privileged EXEC

Client 

Authentication 

Failure Traps

Shows whether the SNMP agent sends a trap when a client attempts to authenticate with a captive 
portal but is unsuccessful.

Client Connection 
Traps

Shows whether the SNMP agent sends a trap when a client authenticates with and connects to a 
captive portal.

Client Database 
Full Traps

Shows whether the SNMP agent sends a trap each time an entry cannot be added to the client 
database because it is full.

Client 
Disconnection 
Traps

Shows whether the SNMP agent sends a trap when a client disconnects from a captive portal.

Format

configuration cp-id

Mode

Captive Portal Config

Format

no configuration cp-id

Mode

Captive Portal Config