Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

This command deauthenticates a specific captive portal client. You can specify a captive 
portal configuration ID to indicate the captive portal configuration that the client is 
deauthenticating from. The optional cp-id variable is the captive portal ID, which ranges 
from 1-10. If no value is entered, then the specified clients (or all clients) are deauthenticated 
from all captive portal configurations.

You can use the optional macaddr variable to specify the MAC address of the client to 
deauthenticate. If no value is specified, then all clients are deauthenticated from the specified 
captive portal configuration (or all configurations).

Use the commands in this section to view information about the interfaces on the switch that 
are associated with captive portals or that are capable of supporting a captive portal.

This command displays the interface to configuration assignments for all captive portal 
configurations or a specific configuration. The optional cp-id variable is the captive portal 
ID, which ranges from 1-10. 

CP ID

Shows the captive portal ID the connected client is using.

CP Name

Shows the name of the captive portal the connected client is using.

Client MAC 

Address

Identifies the MAC address of the wireless client (if applicable).

If you use the optional cp-id information, the following additional information appears:

Client IP Address

Identifies the IP address of the wireless client (if applicable).

Interface

Valid slot and port number separated by a forward slash.

Interface 
Description

Describes the interface.

Format

captive-portal client deauthenticate [cp-id] [macaddr]

Mode

Privileged EXEC

Format

show captive-portal interface configuration [cp-id] status

Mode

Privileged EXEC