Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Management Commands
79
M4200 and M4300 Series ProSAFE Managed Switches
crypto key generate rsa
Use this command to generate an RSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded RSA key files.
existing generated or downloaded RSA key files.
no crypto key generate rsa
Use this command to delete the RSA key files from the device.
crypto key generate dsa
Use this command to generate a DSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded DSA key files.
existing generated or downloaded DSA key files.
no crypto key generate dsa
Use this command to delete the DSA key files from the device.
Management Access Control List Commands
You can use a management Access Control List (ACL) to help control access to the switch
management interface. A management ACL can help ensure that only known and trusted
devices are allowed to remotely manage the switch via TCP/IP. Management ACLs are only
configurable on IP (in-band) interfaces, not on the service port.
management interface. A management ACL can help ensure that only known and trusted
devices are allowed to remotely manage the switch via TCP/IP. Management ACLs are only
configurable on IP (in-band) interfaces, not on the service port.
When a management ACL is enabled, incoming TCP packets initiating a connection (TCP
SYN) and all UDP packets are filtered based on their source IP address and destination port.
When the management ACL is disabled, incoming TCP/UDP packets are not filtered and are
processed normally.
SYN) and all UDP packets are filtered based on their source IP address and destination port.
When the management ACL is disabled, incoming TCP/UDP packets are not filtered and are
processed normally.
management access-list
This command creates a management ACL. The management ACL name can be up to
32 alphanumeric characters. Executing this command enters into access-list configuration
32 alphanumeric characters. Executing this command enters into access-list configuration
Format
crypto key generate rsa
Mode
Global Config
Format
no crypto key generate rsa
Mode
Global Config
Format
crypto key generate dsa
Mode
Global Config
Format
no crypto key generate dsa
Mode
Global Config