Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

Use the commands in this section to close remote connections or to view information about 
connections to the system.

Use the 

disconnect

 command to close HTTP, HTTPS, Telnet or SSH sessions. Use all to 

close all active sessions, or use session-id to specify the session ID to close. To view the 
possible values for session-id, use the show loginsession command.

This command displays current Telnet, SSH and serial port connections to the switch. This 
command displays truncated user names. Use the show loginsession long command 
to display the complete usernames.

Maximum Allowable HTTP 
Sessions

The number of allowable un-secure http sessions.

HTTP Session Hard Timeout The hard timeout for un-secure http sessions in hours.

HTTP Session Soft Timeout

The soft timeout for un-secure http sessions in minutes.

HTTP Mode (Secure)

The secure HTTP server administrative mode. 

Secure Port

The secure HTTP server port number.

Secure Protocol Level(s)

The protocol level may have the values of SSL3, TSL1, or both SSL3 and TSL1.

Maximum Allowable HTTPS 
Sessions

The number of allowable secure http sessions.

HTTPS Session Hard 
Timeout

The hard timeout for secure http sessions in hours.

HTTPS Session Soft 
Timeout

The soft timeout for secure http sessions in minutes.

Certificate Present

Indicates whether the secure-server certificate files are present on the device.

Certificate Generation in 
Progress

Indicates whether certificate generation is currently in progress.

Format

disconnect {session_id | all}

Mode

Privileged EXEC

Format

show loginsession

 

Mode

Privileged EXEC