Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

To specify the match condition as a numeric value, one layer 4 port number is required. The 
port-number

 argument is an integer from 0 to 65535. Use the not option to negate the 

match condition.

This command adds to the specified class definition a match condition based on the value of 
the layer 2 VLAN Identifier field (the only tag in a single tagged packet or the first or outer tag 
of a double VLAN tagged packet). The vlan-id argument is an integer from 0 to 4093. Use 
the not option to negate the match condition.

This command adds to the specified class definition a match condition based on the value of 
the layer 2 secondary VLAN Identifier field (the inner 802.1Q tag of a double VLAN tagged 
packet). The secondary vlan-id argument is an integer from 0 to 4093. Use the not option 
to negate the match condition.

Use the DiffServ policy commands to specify traffic conditioning actions, such as policing and 
marking, to apply to traffic classes

Use the policy commands to associate a traffic class that you define by using the class 
command set with one or more QoS policy attributes. Assign the class/policy association to 
an interface to form a service. Specify the policy name when you create the policy.

Each traffic class defines a particular treatment for packets that match the class definition. 
You can associate multiple traffic classes with a single policy. When a packet satisfies the 

Default

none

Format

match [not] srcl4port {portkey | port-number}

Mode

Class-Map Config

Ipv6-Class-Map Config

Default

none

Format

match [not] vlan vland-id

Mode

Class-Map Config

Ipv6-Class-Map Config

Default

none

Format

match [not] secondary-vlan vlan-id

Mode

Class-Map Config

Ipv6-Class-Map Config