Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

The following information is repeated for each class instance within this policy:

This command displays a summary of policy-oriented statistics information for all interfaces 
in the specified direction. 

The following information is repeated for each interface and direction (only those interfaces 
configured with an attached policy are shown):

This section describes the commands you use to configure MAC Access Control List (ACL) 
settings. MAC ACLs ensure that only authorized users have access to specific resources and 
block any unwarranted attempts to reach network resources. 

The following rules apply to MAC ACLs:

The maximum number of ACLs you can create is hardware dependent. The limit applies 
to all ACLs, regardless of type.

The system supports only Ethernet II frame types.

The maximum number of rules per MAC ACL is hardware dependent.

This command creates a MAC Access Control List (ACL) identified by name, consisting of 
classification fields defined for the Layer 2 header of an Ethernet frame. The name parameter 
is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the MAC 
access list. The rate-limit attribute configures the committed rate and the committed burst 
size.

Class Name

The name of this class instance.

In Discarded 
Packets

A count of the packets discarded for this class instance for any reason due to DiffServ treatment of 

the traffic class. 

Format

show service-policy {in | out}

Mode

Privileged EXEC

Interface

Operational Status

The current operational status of this DiffServ service interface.

Policy Name

The name of the policy attached to the interface.