Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador

The switch operating as a router and running OSPF will determine the best route using 
the assigned cost and the type of the OSPF route. The order for choosing a route if more 
than one type of route exists is as follows:

Intra-area

Inter-area

External type 1: the route is external to the AS

External Type 2: the route was learned from other protocols such as RIP

This example adds support for OSPF to the configuration created in the base VLAN routing 
example in 

Configure the switch as an inter-area router.

(Netgear Switch) #vlan data

(Netgear Switch) (Vlan)#vlan 10

(Netgear Switch) (Vlan)#vlan 20

(Netgear Switch) (Vlan)#vlan routing 10

(Netgear Switch) (Vlan)#vlan routing 20

(Netgear Switch) (Vlan)#exit

(Netgear Switch) #conf

(Netgear Switch) (Config)#ip routing

(Netgear Switch) (Config)#vlan port tagging all 10

(Netgear Switch) (Config)#vlan port tagging all 20

(Netgear Switch) (Config)#interface 1/0/2

(Netgear Switch) (Interface 1/0/2)#vlan participation include 10

(Netgear Switch) (Interface 1/0/2)#vlan pvid 10

(Netgear Switch) (Interface 1/0/2)#exit

(Netgear Switch) (Config)#interface 1/0/3

(Netgear Switch) (Interface 1/0/3)#vlan participation include 20

(Netgear Switch) (Interface 1/0/3)#vlan pvid 20

(Netgear Switch) (Interface 1/0/3)#exit

(Netgear Switch) (Config)#interface vlan 10

(Netgear Switch) (Interface vlan 10)#ip address 192.150.3.1 255.255.255.0

(Netgear Switch) (Interface vlan 10)#exit

(Netgear Switch) (Config)#interface vlan 20

(Netgear Switch) (Interface vlan 20)#ip address 192.150.4.1 255.255.255.0

(Netgear Switch) (Interface vlan 20)#exit