Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador
CoS Queuing
228
Managed Switches
Now 1/0/2 appears in the Interface field at the top.
d. Enter the following information:
•
In the Minimum Bandwidth field, enter 25.
•
In the Scheduler Type list, select Strict.
e. Click Apply to save the settings.
Set CoS Trust Mode for an Interface
The example is shown as CLI commands and as a web interface procedure.
CLI: Set CoS Trust Mode for an Interface
Note:
The traffic class value range is 0–-6 instead of 0–-7 because queue 7
is reserved in a stacking build for stack control, and therefore you
cannot configure it.
is reserved in a stacking build for stack control, and therefore you
cannot configure it.
Web Interface: Set CoS Trust Mode for an Interface
1.
Select QoS > CoS > Advanced > CoS Configuration.
A screen similar to the following displays.
2.
Under CoS Configuration, select the Interface radio button.
3.
In the Interface list, select 1/0/3.
4.
In the Interface Trust Mode list, select trust dot1p.
5.
Click Apply to save the settings.
(Netgear Switch) (Interface 1/0/3)#classofservice trust?
dot1p Sets the Class of Service Trust Mode of an Interface
to 802.1p.
ip-dscp Sets the Class of Service Trust Mode of an Interface
to IP DSCP.
(Netgear Switch) (Interface 1/0/3)#classofservice trust dot1p?
<cr> Press Enter to execute the command.
(Netgear Switch) (Interface 1/0/3)#classofservice trust dot1p