Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador

Port security helps to secure the network by preventing unknown devices from forwarding 
packets. When a link goes down, all dynamically locked addresses are freed. The port 
security feature offers the following benefits:

You can limit the number of MAC addresses on a given port. Packets that have a 
matching MAC address (secure packets) are forwarded; all other packets (unsecure 
packets) are restricted.

You can enable port security on a per port basis.

Port security implements two traffic filtering methods, dynamic locking and static locking. 
These methods can be used concurrently.

Dynamic locking. You can specify the maximum number of MAC addresses that can be 
learned on a port. The maximum number of MAC addresses is platform-dependent and is 
listed in the software release notes. After the limit is reached, additional MAC addresses 
are not learned. Only frames with allowable source MAC addresses are forwarded.

If you want to set a specific MAC address for a port, set the dynamic 
entries to 0, then allow only packets with a MAC address matching the 
MAC address in the static list. 

Dynamically locked addresses can be converted to statically locked addresses. 
Dynamically locked MAC addresses are aged out if another packet with that address is 
not seen within the age-out time. You can set the time-out value. Dynamically locked 
MAC addresses are eligible to be learned by another port. Static MAC addresses are not 
eligible for aging. 

Static locking. You can manually specify a list of static MAC addresses for a port. 
Dynamically locked addresses can be converted to statically locked addresses.