Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador

Add port 11 to the group vlan_ip.

a. Select Switching > VLAN > Advanced > Protocol Based VLAN Group 

Membership. 

A screen similar to the following displays.

b.  In the Group ID list, select 2.

c.  Click the gray box under port 11. A check mark displays in the box.

d.  Click Apply.

In an IP subnet–based VLAN, all the end workstations in an IP subnet are assigned to the 
same VLAN. In this VLAN, users can move their workstations without reconfiguring their 
network addresses. IP subnet VLANs are based on Layer 3 information from packet headers. 
The switch makes use of the network-layer address (for example, the subnet address for 
TCP/IP networks) in determining VLAN membership. If a packet is untagged or priority 
tagged, the switch associates the packet with any matching IP subnet classification. If no IP 
subnet classification can be made, the packet is subjected to the normal VLAN classification 
rules of the switch. This IP subnet capability does not imply a routing function or that the 
VLAN is routed. The IP subnet classification feature affects only the VLAN assignment of a 
packet. Appropriate 802.1Q VLAN configuration must exist in order for the packet to be 
switched.