Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador

b.  Enter the following information:

For Client Mode, Select the Unicast radio button.

In the Time Zone Name field, enter PST.

In the Offset Hours field, enter -8.

c.  Click Apply.

The SNTP/NTP server is set to Coordinated Universal Time (UTC) by default. The following 
example shows how to set the time zone to Pacific Standard Time (PST), which is 8 hours 
behind GMT/UTC.

The example is shown as CLI commands and as a web interface procedure.

NETGEAR provides SNTP servers accessible by NETGEAR devices. Because NETGEAR 
might change IP addresses assigned to its time servers, it is best to access an SNTP server 
by DNS name instead of using a hard-coded IP address. The public time servers available 
are time-a, time-b, and time-c.

Enable a DNS name server and access a time server with the following commands:

where 192.168.1.1 is the public network gateway IP address for your device. 

This method of setting DNS name look-up can be used for any other applications that require 
a public IP address, for example, a RADIUS server.

(Netgear switch)(config)#clock timezone PST -8

(Netgear switch) (config)#ip domain-lookup

(Netgear switch) (config)#ip name-server 192.168.1.1

(Netgear switch) (config)#sntp server time-a.netgear.com