Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador
Syslog
431
Managed Switches
Email Alerting
Email alerting is an extension of the logging system. The logging system allows you to
configure a set of destinations for log messages. This feature adds the email configuration,
through which the log messages are sent to a configured SMTP server such that an
administrator can receive the log in an email account of their choice.
configure a set of destinations for log messages. This feature adds the email configuration,
through which the log messages are sent to a configured SMTP server such that an
administrator can receive the log in an email account of their choice.
This feature is enabled globally. When email alerting is enabled, selected log messages are
sent to an SMTP server. Log messages are divided into three groups by severity level:
urgent, nonurgent, and never.
sent to an SMTP server. Log messages are divided into three groups by severity level:
urgent, nonurgent, and never.
Figure 46. Log message severity levels
The network administrator can adjust the urgent and non-urgent severity levels. These levels
are global and apply to all destination email addresses. Log messages in the urgent group
are sent immediately to the SMTP server with each log message in a separate mail. After a
delay period that you can configure, log messages in the nonurgent group are placed in a
batch in a single email message.
are global and apply to all destination email addresses. Log messages in the urgent group
are sent immediately to the SMTP server with each log message in a separate mail. After a
delay period that you can configure, log messages in the nonurgent group are placed in a
batch in a single email message.
Email alerting also provides a configuration option that allows the network administrator to
specify the severity level at which SNMP traps are logged. Using this option, the
administrator can put traps in the urgent group, the non-urgent group, or the never group for
emailing. Traps are not emailed by default. For traps to be emailed, the network administrator
has to either increase the severity at which traps are logged, or lower the severity level of log
messages that are emailed.
specify the severity level at which SNMP traps are logged. Using this option, the
administrator can put traps in the urgent group, the non-urgent group, or the never group for
emailing. Traps are not emailed by default. For traps to be emailed, the network administrator
has to either increase the severity at which traps are logged, or lower the severity level of log
messages that are emailed.
The network administrator can configure multiple destination email addresses, and for each
email address, specify whether to deliver urgent log messages, nonurgent log messages, or
both.
email address, specify whether to deliver urgent log messages, nonurgent log messages, or
both.
When the log buffer is full, an exception occurs to how messages are sent to the SMTP
server. When the log buffer is full before the periodic timer expires, the periodic timer is
ignored and all log messages that were not sent previously are immediately forwarded to the
SMTP server.
server. When the log buffer is full before the periodic timer expires, the periodic timer is
ignored and all log messages that were not sent previously are immediately forwarded to the
SMTP server.
FOR POSITION
ONLY (FPO)
ONLY (FPO)