Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador
Switch Stacks
439
Managed Switches
b. Attempt again to copy the firmware to the units that did not get updated by issuing
the copy command in stack configuration mode.
3.
After the firmware is loaded to all members of the stack, reset all the switches
The new firmware takes effect.
Migrate Configuration with a Firmware Upgrade
In some cases, a configuration might not be carried forward in a firmware update.
If a configuration is not carried forward in a firmware update, to download new
firmware to the master switch and other switches in the stack:
firmware to the master switch and other switches in the stack:
1.
Save the current configuration by uploading it from the stack, using the copy command
from the CLI.
from the CLI.
2.
Load new firmware onto the stack manager.
3.
Reboot the stack.
4.
Upon reboot, enter the boot menu and erase the configuration (that is, restore is to factory
default settings).
default settings).
5.
Continue with the boot of the operational firmware.
6.
After the stack is up, download the saved configuration to the master.
This saved configuration is automatically propagated to all members of the stack.
Web Interface: Copy Master Firmware to a Stack Member
1.
Select Maintenance > File Management > Copy.
A screen similar to the following displays.
2.
In the Stack Member menu, select 2.
3.
Click Apply.