Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador
STP
513
Managed Switches
Web Interface: Configure PVSTP
You must configure PVSTP on Switch 1 and Switch 2. This example assumes that all
switches can support PVSTP.
switches can support PVSTP.
Web Interface: Configure PVSTP on Switch 1
1.
Ensure that ports 1/0/1 and 1/0/2 are in VLAN 1002 in tagged mode because BPDU
packets for PVSTP are transmitted in tagged packets.
packets for PVSTP are transmitted in tagged packets.
2.
Enable PVSTP.
a. Select Switching > STP > Basic > STP Configuration.
A screen similar to the following displays.
b. Configure the following settings:
•
For Spanning Tree Admin Mode, select the Enable radio button.
•
For Force Protocol Version, select the PVST radio button.
c. Click Apply.
Note:
After you enable PVST globally, PVST is applied to VLANs automatically.
3.
Display the PVST status for port 1/0/1 and 1/0/2 in VLAN 1002.
a. Select Switching > STP > Advanced > PVST Interface.
A screen similar to the following displays.