Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador

DHCP relay agents eliminate the need to have a DHCP server on each physical network. 
Relay agents populate the giaddr field and also append the Relay Agent Information 
option to the DHCP messages. DHCP servers use this option for IP addresses and other 
parameter assignment policies. These DHCP relay agents are typically IP routing-aware 
devices and are referred to as Layer 3 relay agents. 

 In some network configurations, Layer 2 devices can append the relay agent Information 
option as they are closer to the end hosts. 

These Layer 2 devices typically operate only as bridges for the network and might not have 
an IPv4 address on the network. Lacking a valid IPv4 source address, they cannot relay 
packets directly to a DHCP server on another network. These Layer 2 devices append the 
Relay agent information option and broadcast the DHCP message. This section provides 
information about where a Layer 2 relay agent fits in and how it is used. 

Enter the following commands:

(Netgear Switch)#vlan database

(Netgear Switch)(Vlan)#vlan 200

(Netgear Switch)(Vlan)#exit

DHCP Server #1

Host #1

Host #2

Layer 2 Switch #1

1/0/4

1/0/5

1/0/6