Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador

The example is shown as CLI commands and as a web interface procedure.

The following code sequence shows how to enable routing for the VLANs:

This returns the logical interface IDs that will be used instead of the slot/port in 
subsequent routing commands. Assume that VLAN 10 is assigned the ID 3/1, and VLAN 
20 is assigned the ID 3/2.

Enable routing for the switch.

The next sequence shows an example of configuring the IP addresses and subnet masks 
for the virtual router ports.

(Netgear Switch) #vlan data

(Netgear Switch) (Vlan)#vlan routing 10

(Netgear Switch) (Vlan)#vlan routing 20

(Netgear Switch) (Vlan)#exit

(Netgear Switch) #config

(Netgear Switch) (Config)#ip routing

(Netgear Switch) (Config)#exit

(Netgear Switch) (Config)#interface vlan 10

(Netgear Switch) (Interface-vlan 10)#ip address 192.150.3.1 255.255.255.0

(Netgear Switch) (Interface-vlan 10)#exit

(Netgear Switch) (Config)#interface vlan 20

(Netgear Switch) (Interface-vlan 20)#ip address 192.150.4.1 255.255.255.0

(Netgear Switch) (Interface-vlan 20)#exit

(Netgear Switch) (Config)#exit