Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador

The example is shown as CLI commands and as a web interface procedure.

This command sequence enables RIP for ports 1/0/2 and 1/0/3. Authentication defaults to 
none, and no default route entry is created. The commands specify that both ports receive 
both RIPv1 and RIPv2 frames, but send only RIPv2-formatted frames.

Select Routing > RIP > Advanced > RIP Configuration. 

A screen similar to the following displays.

Scroll down and select the Interface 1/0/2 and 1/0/3 check box. 

(Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/2

(Netgear Switch) (Interface 1/0/2)#ip rip

(Netgear Switch) (Interface 1/0/2)#ip rip receive version both

(Netgear Switch) (Interface 1/0/2)#ip rip send version rip2

(Netgear Switch) (Interface 1/0/2)#exit

(Netgear Switch) (Config)#interface 1/0/3

(Netgear Switch) (Interface 1/0/3)#ip rip

(Netgear Switch) (Interface 1/0/3)#ip rip receive version both

(Netgear Switch) (Interface 1/0/3)#ip rip send version rip2

(Netgear Switch) (Interface 1/0/3)#exit

(Netgear Switch) (Config)#exit