Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guia Do Administrador

The example is shown as CLI commands and as a Web interface procedure.

Use the following CLI commands to set up the switch to generate an IGMP querier packet for 
a designated VLAN. The IGMP packet will be transmitted to every port on the VLAN. The 
following example enables the querier for VLAN 1 and uses 10.10.10.1 as the source IP 
address in querier packets. See the Command Line Reference for more details about other 
IGMP querier command options.

(Netgear switch) #vlan database

(Netgear switch) (vlan)#set igmp 1

(Netgear switch) (vlan)#set igmp querier 1

(Netgear switch) (vlan)#exit

(Netgear switch) #config

(Netgear switch) (config)#set igmp querier

(Netgear switch) (config)#set igmp querier address 10.10.10.1

(Netgear switch) (config)#exit

Select Switching > Multicast > IGMP VLAN Configuration. 

A screen similar to the following displays.

Enable IGMP snooping on VLAN 1.

a. Select Switching > Multicast > IGMP Snooping > IGMP VLAN Configuration.