Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch Guia Do Administrador

The example is shown as CLI commands and as a Web interface procedure.

(Netgear Switch) #config

(Netgear Switch) (Config)#port-channel name lag 1 lag_10

(Netgear Switch) (Config)#port-channel name lag 1 lag_20

(Netgear Switch) (Config)#exit

Use the show port-channel all command to show the logical interface IDs you will use to 
identify the LAGs in subsequent commands. Assume that lag_10 is assigned ID 1/1, and 
lag_20 is assigned ID 1/2.

(Console) #show port-channel all

            Port-                  Link

Log.       Channel            Adm. Trap  STP           Mbr      Port    Port

Intf        Name        Link  Mode Mode  Mode   Type   Ports    Speed   Active

------ --------------- ------ ---- ---- ------ ------- ------ --------- ------

1/1    lag_10          Down   En.  En.  Dis.   Dynamic

1/2    lag_20          Down   En.  En.  Dis.   Dynamic

Create LAG lag_10.

a. Select Switching > LAG > LAG Configuration. 

A screen similar to the following displays.

b.  In the Lag Name field, enter lag_10.

c.  Click Add.

Create LAG lag_20.