Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Get Started
19
M4200 and M4300 Series ProSAFE Managed Switches Software Setup Manual
To access the web management interface:
1.
Connect an Ethernet cable from an Ethernet port on your computer either to an Ethernet
network port on the switch or to the OOB port on the switch.
network port on the switch or to the OOB port on the switch.
2.
Launch a web browser such as Google Chrome, Mozilla Firefox, or Microsoft Internet
Explorer.
Explorer.
3.
Enter http://<ipaddress> in the URL field of your browser, in which <ipaddress> is either
the management interface IP address or the OOB port IP address, depending on your
type of connection.
the management interface IP address or the OOB port IP address, depending on your
type of connection.
A login window opens.
4.
Enter admin for the user name, leave the password field blank, and click the LOGIN button.
The System Information page displays. You can now navigate from this page to other
pages and configure your switch.
pages and configure your switch.
You are ready to configure the switch through the web management interface. For detailed
information about how to use the web management interface to configure the switch with all
its options, see the M4200 and M4300 Series ProSAFE Managed Switches Web
Management User Manual, which is available at
information about how to use the web management interface to configure the switch with all
its options, see the M4200 and M4300 Series ProSAFE Managed Switches Web
Management User Manual, which is available at
downloadcenter.netgear.com
.
Configure an SNMPv3 User Profile Using the Web
Management Interface
Management Interface
Configuring an SNMPv3 user profile is a part of the user configuration. Any user can connect
to the switch using the SNMPv3 protocol, but for authentication and encryption, additional
steps are needed.
to the switch using the SNMPv3 protocol, but for authentication and encryption, additional
steps are needed.
This procedure describes how to access the web management interface and configure an
SNMPv3 user profile when you already know the switch IP address for your access method.
SNMPv3 user profile when you already know the switch IP address for your access method.
Either connect to an Ethernet network port and use the management interface IP address or
connect to the OOB port and use the OOB port IP address.
connect to the OOB port and use the OOB port IP address.
To configure an SNMP V3 new user profile:
1.
Connect an Ethernet cable from an Ethernet port on your computer either to an Ethernet
network port on the switch or to the OOB port on the switch.
network port on the switch or to the OOB port on the switch.
2.
Launch a web browser such as Google Chrome, Mozilla Firefox, or Microsoft Internet
Explorer.
Explorer.
3.
Enter http://<ipaddress> in the URL field of your browser, in which <ipaddress> is either
the management interface IP address or the OOB port IP address, depending on your
type of connection.
the management interface IP address or the OOB port IP address, depending on your
type of connection.
A login window opens.
4.
Enter admin for the user name, leave the password field blank, and click the LOGIN button.
The System Information page displays.