Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Stacking
157
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The valid range is 100 to 500.
8.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure a Stack Member
To configure a stack member before adding it to the stack:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select System > Stacking > Stack Configuration.
6.
Select the Unit ID of the stack member to add.
7.
Select the switch model number of the new unit from the Switch Type field.
8.
Optionally, specify the Switch Priority to select whether this unit becomes a management
unit in preference to another unit.
The default value for this setting is undefined. If the preference level is set to zero, then
the device cannot become a management unit. A higher value indicates a higher priority.
The maximum value is 15.
the device cannot become a management unit. A higher value indicates a higher priority.
The maximum value is 15.
9.
Use the Management Status field to indicate whether the selected switch is the stack
master, a normal stacking member, or the standby unit.
A standby unit takes over the stack master responsibilities if the stack master becomes
unavailable.