Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

The NETGEAR Prosafe Managed software version 12.0.2 is for the M4200 and M4300 
Series ProSAFE Managed Switches with 10G uplinks.

These switches introduce the following new features:

Support for link dependency

The link dependency feature lets you enable or disable one or more ports based on the 
link state of one or more different ports. With link dependency enabled on a port, the link 
state of that port depends on the link state of another port. For example, if port A depends 
on port B and the switch detects a link loss on port B, the switch automatically brings 
down the link on port A. When the link is restored to port B, the switch automatically 
restores the link to port A. For more information, see 

Capability to send syslog messages can be sent to a to a USB flash storage drive. For 
more information, see 

Capability to send packets that are mirrored from the CPU to a USB flash storage drive. 
For more information, see 

Support for an out-of-band (OOB) port.

, including the 

following publication:

The installation guide for your switch:

The hardware installation guide for your switch:

M4200 and M4300 Series ProSAFE Managed Switches User Manual (this document).

You can also access this document online when you are logged in to the switch. Select 
Help > Online Help > User Guide.