Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Stacking
164
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
Specify whether Stack Firmware Auto Upgrade is enabled or disabled.
This feature determines what to do when a new member attempts to join the stack, and
its firmware does not match the version running on the master.
its firmware does not match the version running on the master.
•
Enable
. The stack master upgrades the version on the new member to match the
version running on the rest of the stack.
•
Disable
. The new member is not allowed to join.
7.
Use the Traps field to enable or disable sending of traps during stack firmware
synchronization start, failure, or finish.
8.
Use the Allow Downgrade field to determine whether the stack master downgrades the
firmware version on a new member that attempts to join the stack if the new member has a
firmware version that is more recent that the stack.
9.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
View NSF Summary Data
To display NSF Summary data:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select System > Stacking > NSF > NSF Summary