Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Switching Information
178
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable information displayed on the page.
Configure Port PVID Settings
You can assign a port VLAN ID (PVID) to an interface. There are certain requirements for a
PVID:
PVID:
•
You must define a PVID for all ports.
•
If no other value is specified, the default VLAN PVID is used.
•
To change the port’s default PVID, you must first create a VLAN that includes the port as
a member.
a member.
•
Use the Port VLAN ID (PVID) Configuration page to configure a virtual LAN on a port.
To configure PVID settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching
> VLAN > Advanced > Port PVID Configuration.
Table 67. VLAN Status
Field
Definition
VLAN ID
The VLAN identifier (VID) of the VLAN. The range of the VLAN ID is 1
to 4093.
to 4093.
VLAN Name
The name of the VLAN. VLAN ID 1 is always named `Default`.
VLAN Type
The VLAN type:
•
Default
(VLAN ID = 1). Always present
•
Static
. A VLAN that you configured
•
Dynamic
. A VLAN created by GVRP registration that you did not
convert to static, and that GVRP can therefore remove
Routing Interface
The interface associated with the VLAN, in the case that VLAN routing
is configured for this VLAN.
is configured for this VLAN.
Member Ports
The ports that are included in the VLAN.