Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Switching Information
198
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Control iSCSI Target Settings
You can view iSCSI targets and assign target ports/port IP address combinations for iSCSI
optimization on the switch.
optimization on the switch.
To configure iSCSI target settings
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching > iSCSI > Advanced > iSCSI Targets.
6.
In the TCP Port field, specify the TCP port for the target that monitors iSCSI traffic.
Up to 16 TCP ports can be defined in the system. The well-known iSCSI ports 860 and
3260 are configured as defaults but you can remove them as any other configured target.
3260 are configured as defaults but you can remove them as any other configured target.
7.
In the IP address field, specify an IP address for the target that monitors iSCSI traffic.
The default is 0.0.0.0.
8.
In the Target Name field, specify a name to assign to the target.
The iSCSI Target Name can be up to 233 characters in length.
9.
Click the Add button.
The iSCSI targets configuration is added.