Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Switching Information
219
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The allowed values are between 0 and 61440. The valid values are listed in the following
table.
table.
The default value is 32768. If the value configured is not among the specified values,
then it is rounded off to the nearest valid value.
then it is rounded off to the nearest valid value.
12.
Click the Add button.
PVST/RPVST is enabled for the selected VLAN.
13.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure the PVST Interface Settings
You can view and configure Per VLAN Spanning Tree Protocol (PVST)/Per VLAN Rapid
Spanning Tree Protocol (RPVST) Interface settings for the device.
Spanning Tree Protocol (RPVST) Interface settings for the device.
To configure the PVST/RPVST Interface settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching > STP > Advanced > PVST Interface.
Table 82. PVST/RPVST VLAN Configuration - VLAN Bridge Priority
0
4096
8192
12288
16384
20480
24576
28672
32768 (default)
36864
40960
45056
49152
53248
57344
61440