Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

This specifies the administrative mode for IGMP snooping for the switch. The default is 
Disable.

Use the Validate IGMP IP header option to Enable or Disable header validation for all 

IGMP versions. 

If Validate IGMP IP Header is enabled, then IGMP IP header checks for Router Alert 
option, ToS and TTL. The default value is Enable.

Select the Proxy Querier Mode Enable or Disable radio button.

This enables or disables IGMP proxy querier on the system. If disabled, then the IGMP 
proxy query with source IP 0.0.0.0 is not sent in response to IGMP leave packet. the 
default value is Enable.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The following table displays information about the global IGMP snooping status and statistics 
on the page.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Switching

> Multicast > IGMP Snooping > Interface Configuration.

Multicast Control Frame Count

The number of multicast control frames that are processed by the CPU.

Interfaces Enabled for IGMP 
Snooping

A list of all the interfaces currently enabled for IGMP snooping.

VLAN IDs Enabled For IGMP 
Snooping 

Displays VLAN IDs enabled for IGMP snooping.