Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Switching Information
234
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable information displayed on the page.
Configure MLD Snooping
You can configure the parameters for MLD snooping, which is used to build forwarding lists
for multicast traffic. Only a user with read/write access privileges can change the data on this
page.
for multicast traffic. Only a user with read/write access privileges can change the data on this
page.
To configure MLD snooping:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching
> Multicast > MLD Snooping > Configuration.
Table 88. Querier VLAN Configuration
Field
Description
Operational State
The operational state of the IGMP snooping querier on a VLAN. It can
be in any of the following states:
be in any of the following states:
•
Querier
: The snooping switch is the querier in the VLAN. The
snooping switch sends out periodic queries with a time interval
equal to the configured querier query interval. If the snooping
switch finds a better querier in the VLAN, it moves to non-querier
mode.
equal to the configured querier query interval. If the snooping
switch finds a better querier in the VLAN, it moves to non-querier
mode.
•
Non-Querier
: The snooping switch is innNon-querier mode in the
VLAN. If the querier expiry interval timer expires, the snooping
switch moves into querier mode.
switch moves into querier mode.
•
Disabled
: The snooping querier is not operational on the VLAN.
The snooping querier moves to disabled mode when IGMP
snooping is not operational on the VLAN or when the querier
address is not configured or the network management address is
also not configured.
snooping is not operational on the VLAN or when the querier
address is not configured or the network management address is
also not configured.
Operational Version
The operational IGMP protocol version of the querier.
Last Querier Address
The IP address of the last querier from which a query was snooped on
the VLAN.
the VLAN.
Last Querier Version
The IGMP protocol version of the last querier from which a query was
snooped on the VLAN.
snooped on the VLAN.
Operational Max Response Time
Displays maximum response time to be used in the queries that are
sent by the snooping querier.
sent by the snooping querier.