Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Switching Information
242
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure MLD Snooping Querier VLAN Settings
To configure MLD snooping querier VLAN settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching
> Multicast > MLD Snooping > Querier VLAN Configuration.
6.
Use VLAN ID
to select the VLAN ID on which the MLD snooping querier is administratively
enabled and a VLAN exists in the VLAN database.
7.
Use Querier Election Participate Mode to enable or disable the MLD snooping querier
participation in election mode.
When this mode is disabled, on detecting another querier of same version in the VLAN,
the snooping querier moves to a non-querier state. When this mode is enabled, the
snooping querier participates in querier election where the lowest IP address wins the
querier election and operates as the querier in that VLAN. The other querier moves to
non-querier state.
the snooping querier moves to a non-querier state. When this mode is enabled, the
snooping querier participates in querier election where the lowest IP address wins the
querier election and operates as the querier in that VLAN. The other querier moves to
non-querier state.
8.
Use Querier VLAN Address to specify the snooping querier address to be used as the
source address in periodic MLD queries sent on the specified VLAN.
9.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.