Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Switching Information
253
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
Use Interface to select the physical interface/LAGs.
7.
In the Static MAC Address field, type the MAC address.
8.
Select the VLAN ID associated with the MAC address.
9.
Take one of the following actions:
•
Click the Add button.
The static MAC address is added to the switch.
The static MAC address is added to the switch.
•
Click the Delete button.
The static MAC address deleted from the switch.
The static MAC address deleted from the switch.
Port Settings
You can view and monitor the physical port information for the ports available on the switch.
Configure Port Settings
You can configure the physical interfaces on the switch.
To configure port settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching > Ports > Port Configuration.
6.
Use Port to select the interface.
7.
Use STP Mode to select the Spanning Tree Protocol administrative mode for the port or
LAG.
The possible values are as follows:
•
Enable
. Select this to enable the Spanning Tree Protocol for this port.
•
Disable
. Select this to disable the Spanning Tree Protocol for this port.