Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Switching Information
260
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
13.
Click the Apply button.
The switch is updated with the values you entered. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable information displayed on the page.
Configure LAG Membership
You can select two or more full-duplex Ethernet links to be aggregated together to form a link
aggregation group (LAG), which is also known as a port-channel. The switch can treat the
port-channel as if it were a single link.
aggregation group (LAG), which is also known as a port-channel. The switch can treat the
port-channel as if it were a single link.
To configure LAG membership:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching
> LAG > LAG Membership.
Table 99. LAG Configuration
Field
Description
LAG Description
Enter the description string to be attached to a LAG. It can be up to 64
characters in length.
characters in length.
LAG ID
Identification of the LAG.
LAG State
Indicates whether the link is up or down.
Configured Ports
Indicate the ports that are members of this port-channel
Active Ports
Indicates the ports that are actively participating in the port-channel.