Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netgear
  4. M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3
  5. Manual Do Utilizador

Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

Download
Página de 700
Routing 
286
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual 
Configure Routing Parameters for the Switch
You can configure routing parameters for the switch as opposed to an interface. 
To configure routing parameters for the switch:
1. 
Launch a web browser.
2. 
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. 
Enter the user name and password. 
The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.
4. 
Click the Login button. 
The System Information page displays.
5. 
Select Routing
> IP > Advanced > IP Configuration.
6. 
Use Routing Mode to select Enable or Disable. 
You must enable routing for the switch before you can route through any of the interfaces. 
The default value is Disable.
7. 
Use ICMP Echo Replies to select Enable or Disable.
IcmpOutTimestamps
The number of ICMP timestamp (request) messages.
IcmpOutTimestampReps
The number of ICMP timestamp reply messages sent.
IcmpOutAddrMasks
The number of ICMP address mask request messages sent.
Table 106.  IP Basic Statistics  (continued)
Field
Description