Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Routing
301
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
11.
In the Preferred Life Time field, specify the router advertisement per prefix time.
An autoconfigured address generated from this prefix is preferred. The preferred life time
must be in the range 0 to 4294967295.
12.
From the Onlink Flag list, select Enable or Disable.
This specifies whether the selected prefix can be used for on-link determination. The
default is Enable.
default is Enable.
13.
In the Autonomous Flag list, select Enable or Disable.
This specifies whether the selected prefix can be used for autonomous address
configuration. The default value is Enable.
configuration. The default value is Enable.
14.
Click the Add button.
The IPv6 address is added to the interface.
15.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The Current State field displays the state of the IPV6 address. The state is TENT if
routing is disabled or DAD fails. The state is Active if the interface is active and DAD is
successful.
routing is disabled or DAD fails. The state is Active if the interface is active and DAD is
successful.
View IPv6 Statistics
To view IPv6 interface statistics:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 > Advanced > Statistics.