Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Routing
329
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
This is the maximum length of time that the advertised addresses are to be considered as
valid router addresses by hosts.
valid router addresses by hosts.
12.
Use Preference Level to specify the preference level of the router as a default router
relative to other routers on the same subnet.
Higher numbered addresses are preferred. You must enter an integer.
13.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure Virtual Router Redundancy Protocol
Note:
Virtual Redundancy Protocol (VRRP) is supported on the
M4300 series switches only.
M4300 series switches only.
Configure Global VRRP Settings
To configure the global VRRP settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > VRRP > Basic > VRRP Configuration.
6.
In the Global Configuration Admin Mode field, set the administrative status of VRRP in the
router by selecting the Enable or Disable radio button.