Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
OSPF and OSPFv3
350
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the OSPF Area Range
Configure the OSPF area range:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > OSPF > Advanced > Area Range Configuration.
6.
Enter the OSPF Area ID.
An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to
which a router interface connects.
7.
Enter the IP Address for the address range for the selected area.
8.
Enter the Subnet Mask for the address range for the selected area.
9.
From the list in the LSDB Type field, select the type of link advertisement associated with
the specified area and address range.
Options are as follows: Network Summary or NSSA External. The default type is
Network Summary.
Network Summary.
10.
In the Advertise list, select Enable or Disable.
If you select Enable, the address range is advertised outside the area through a network
summary LSA. The default is Enable.
summary LSA. The default is Enable.
11.
Click the Add button.
The new address range is added.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.