Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
OSPF and OSPFv3
363
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable data that is displayed in the AS Opaque
Link State Database (LSDB) table.
Link State Database (LSDB) table.
Configure the OSPF Virtual Link
To configure the OSPF virtual link:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > OSPF > Advanced > Virtual Link Configuration.
Table 136. OSPF AS Opaque Link State Database Table
Field
Description
Router ID
The 32-bit integer in dotted-decimal format that uniquely identifies the
router within the autonomous system (AS). The router ID is set on the
IP Configuration page. To change the router ID you must first disable
OSPF. After you set the new router ID, you must reenable OSPF for the
change to take effect. The default value is 0.0.0.0, although this is not a
valid router ID.
router within the autonomous system (AS). The router ID is set on the
IP Configuration page. To change the router ID you must first disable
OSPF. After you set the new router ID, you must reenable OSPF for the
change to take effect. The default value is 0.0.0.0, although this is not a
valid router ID.
LSA Type
The format and function of the link state advertisement. LSA Type is
one of the following:
one of the following:
•
Area Opaque
•
AS Opaque
•
Link Opaque
LS ID
The link state ID identifies the piece of the routing domain that is being
described by the advertisement. The value of the LS ID depends on the
advertisement's LS type.
described by the advertisement. The value of the LS ID depends on the
advertisement's LS type.
Age
The time since the link state advertisement was first originated, in
seconds.
seconds.
Sequence
The sequence number field is a signed 32-bit integer. It is used to
detect old and duplicate link state advertisements. The larger the
sequence number, the more recent the advertisement.
detect old and duplicate link state advertisements. The larger the
sequence number, the more recent the advertisement.
Checksum
The checksum is used to detect data corruption of an advertisement.
This corruption can occur while an advertisement is being flooded, or
while it is being held in a router's memory. This field is the checksum of
the complete contents of the advertisement, except the LS age field.
This corruption can occur while an advertisement is being flooded, or
while it is being held in a router's memory. This field is the checksum of
the complete contents of the advertisement, except the LS age field.