Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

OSPFv3 is supported on the M4300 series switches only.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Routing > OSPFv3 > Basic > OSPFv3 Configuration. 

Select the Admin Mode Disable or Enable radio button.

If you select Enable, OSPFv3 is activated for the switch. By default, OSPFv3 is enabled. 
You must configure a router ID before OSPFv3 can become operational. For more 
information, see 

Once OSPFv3 is initialized on the router, it remains initialized until the 
router is reset.

Enter the Router ID as a 32-bit integer in dotted-decimal format that uniquely identifies the 

router within the autonomous system (AS). 

To change the router ID, you must first disable OSPFv3. After you set the new router ID, 
you must reenable OSPFv3 for the change to take effect. The default value is 0.0.0.0, 
although this is not a valid router ID.

Click the Apply button.