Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
OSPF and OSPFv3
380
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable data that is displayed.
Configure the OSPFv3 Area Range
To configure the OSPFv3 area range:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > OSPFv3 > Advanced > Area Range Configuration.
Table 142. Advanced OSPFv3 NSSA Area Configuration
Field
Description
SPF Runs
The number of times that the intra-area route table was calculated
using this area's link state database. This is typically done using
Dijkstra's algorithm.
using this area's link state database. This is typically done using
Dijkstra's algorithm.
Area Border Router Count
The total number of area border routers reachable within this area. This
is initially zero, and is calculated in each SPF pass.
is initially zero, and is calculated in each SPF pass.
Area LSA Count
The total number of link state advertisements in this area's link state
database, excluding AS external LSAs.
database, excluding AS external LSAs.
Area LSA Checksum
The 32-bit unsigned sum of the link state advertisements' LSA
checksums contained in this area's link state database. This sum
excludes external (LSA type 5) link state advertisements. The sum can
be used to determine if there was a change in a router's link state
database, and to compare the link state database of two routers.
checksums contained in this area's link state database. This sum
excludes external (LSA type 5) link state advertisements. The sum can
be used to determine if there was a change in a router's link state
database, and to compare the link state database of two routers.
Translator State
The field tells you if and how the NSSA border router translates Type 7
into Type 5. Possible values are as follows:
into Type 5. Possible values are as follows:
•
Enabled
. The NSSA border router's translator role was set to
always.
•
Elected
. The candidate NSSA border router is translating Type 7
LSAs into Type 5.
•
Disabled
. The candidate NSSA border router is NOT translating
Type 7 LSAs into Type 5.